Comments

8 comments

  • Elizabeth Swoope

    The camera will not take motion-triggered photos. It will still do time lapse and scheduled events (both photos and status reports).

    0
    Comment actions Permalink
  • Dusty Johnson

    I turned 3 of my cameras sensitivity to off for 2 days. Then sent a command to set sensitivity at normal. It doesn’t up date. No photos.

    0
    Comment actions Permalink
  • John Lockburner

    You will have to wait for the number 1 scheduled status report for the camera to update, it's usually set to midnight. Or you can physically turn the camera off and back on.

    0
    Comment actions Permalink
  • Dusty Johnson

    Ok 👍

    0
    Comment actions Permalink
  • Elizabeth Swoope

    This is just one of several good reasons to set some scheduled events. If you use scheduled events (either status reports, photos, or a combination of the two) throughout the day, every 2-6 hours, you don’t have to wait until the midnight scheduled event 1 for the camera to contact the server and get your request.

    0
    Comment actions Permalink
  • Dusty Johnson

    Thank you. Only problem is I have zero scheduled events. No status reports or photos. I have 8 cameras. I grew tired of to many emails or text. I reckon I’ll be driving 853 miles to get the 3 i
    Turned to off. No problem them being off for now.

    0
    Comment actions Permalink
  • John Lockburner

    The cameras always come with one scheduled status report for midnight (for this reason), you can't turn that off, only change the time.

    0
    Comment actions Permalink
  • Elizabeth Swoope

    As Johnny says, you'll always have one scheduled event status report a day so don't give up yet. If you turned sensitivity back on sometime today, the cameras won't check in until midnight (or whatever time you set for the scheduled event 1).

    You do not have to get status reports via email or text. Go to the portal (my.spartancamera.com), log in, choose Camera Management, then delivery options. For each camera, go to the bottom and remove any addresses for status reports.

    0
    Comment actions Permalink

Please sign in to leave a comment.