Latest Firmware for GC-A4Gb?

Comments

9 comments

  • Elizabeth Swoope

    For the time being, it is, but there will probably be another one out fairly soon. You’ll see the orange Update button in the app when it’s available.

    0
    Comment actions Permalink
  • John Lockburner

    I believe there's a 9/12/2019 update available

    0
    Comment actions Permalink
  • bradley olson

    I'm even more concerned about my newest cams. They say 2018/11/28 is camera firmware but it also says Firmware is up to date.
    Can't figure out how to submit a picture here otherwise I'd show you.
    When I try to do firmware upgrade on camera it says File not found.

    0
    Comment actions Permalink
  • Elizabeth Swoope

    If it says firmware is up to date, you don’t need to update.

    The FW Update menu choice is only for a manual update. You have to download the firmware file to the SD card so the camera can find it. You haven’t done that, which is why the camera is saying that the file isn’t found. You didn’t put the file on the SD card for the camera to find. But if the app says the FW is current, you don’t need to do that.

     

    0
    Comment actions Permalink
  • bradley olson

    Thanks. I watched the video on doing the firmware update manually. Would prefer not to do that!

    0
    Comment actions Permalink
  • Elizabeth Swoope

    It’s not at all hard. It’s just that it’s not going to do you any good at all if the firmware is current.

     

    0
    Comment actions Permalink
  • marty HIATT

    Daytime Temp readings are always 25 degrees or more too high

    0
    Comment actions Permalink
  • marty HIATT

    I have 4 cams. This is my 3rd year. I’ve found that most problems associated with the Spartan are consumer user errors... lol

    0
    Comment actions Permalink
  • Elizabeth Swoope

    Marty, 

    If the cameras are in sun or a sun-warmed area, the temperature is going to be high. Night temps are typically accurate. 

    Yes, there are a lot of user-error problems :). But there are also cameras that are bad and it’s a matter of troubleshooting, hoping that it’s user error (because that can usually be fixed fairly easily), and if it’s not, then there’s repair or replacement.

    0
    Comment actions Permalink

Please sign in to leave a comment.