Run away pics

Comments

6 comments

  • John Lockburner

    Any chance there's a T on the bottom of the picture where the M usually is? You can try defaulting the camera or updating the firmware to see if that helps. If the firmware is current you will have to do a manual update. I would try putting the camera in a closet face down to see if it triggers non stop in there. Also look and make sure that there's no ants inside the camera.

    0
    Comment actions Permalink
  • Phil Bancroft

    It has the standard M as if it was motion activated.  I reset it to default settings , but it’s a buddies cam and he reloaded the settings from the ap.   I’ll pull it and bring it home next time and reset manual , the firmware was updated not too long ago but will check it as well. 

    0
    Comment actions Permalink
  • Phil Bancroft

    Brought it home and pointed at the ceiling and it takes a pic when the interval passes.  The PIR lens has a small intended line on it, other than that all looks normal.  Have another one that won’t power on, maybe I’ll try surgery one day and swap parts 🤪

    0
    Comment actions Permalink
  • John Lockburner

    Is it a dent or a hole?

    0
    Comment actions Permalink
  • Phil Bancroft

    Like a long intended thin line, like a scratch but not a scratch.   It’s not through the plastic. 

    0
    Comment actions Permalink
  • John Lockburner

    I wonder if that's causing the false triggers. Try putting the camera face down in a closet or cabinet. Your can also try updating the firmware. I've seen that help a few times.

    0
    Comment actions Permalink

Please sign in to leave a comment.