Battery drain
I have a camera for security purposes and it is powered by a power supply 110 converter
The camera quit working and I determined it was the power supply had quit working.
I ordered a new power supply from Spartan and in the mean time I put all new lithium Energizer batteries in the camera so I could use the camera until my new power supply was mailed to me after I put the new batteries in the camera the batteries were spent in about
24 hrs.
. I did forget to switch the camera to power saving mode but still the camera should not have drained the batteries in about 24 hrs with the power saving turned off.
What could be wrong ?
Also with these power converters they seem to not have a very good service life.
This particular camera the power supply I have had to replace it twice in approximately the last 12 months give or take and I have had to change it on another camera.There has been no thunderstorms recently that could have caused a power surge.
Thank you
-
What model camera is this? (Model number is under the description on the home page of the app.)
Did the camera quit working with the lithiums in it? Or are you going by the status report?
Please post a screen shot of the status report from the app.
-
House - GC-Z4Gb2/GoCam (Verizon 4G) Blackout - 862515040216628 ID(90684SignalBatteryPower Voltage5.70 VoltsICCID89148000004681357169WarrantyLast Update2021-04-22 17:26:09Card Size31,155 MBCard Space31,131 MB 100%Temp77FTimezoneUTC-04:00Photo/Video Lifetime5324Photo/Video Current Month11 ⓘInformationDSP:2019/11/22-19:38:57 MCU:RL190411
Recent Photos:
House - GC-Z4Gb2/GoCam (Verizon 4G) Blackout - 862515040216628 ID(90684SignalBatteryPower Voltage5.70 VoltsICCID89148000004681357169WarrantyLast Update2021-04-22 17:26:09Card Size31,155 MBCard Space31,131 MB 100%Temp77FTimezoneUTC-04:00Photo/Video Lifetime5324Photo/Video Current Month11 ⓘInformationDSP:2019/11/22-19:38:57 MCU:RL190411Recent Photos:
-
The pictures were after the batteries were put in I followed all of the normal steps when I put a camera in the field format tests default re-enter things/settings the way that I originally set them.
When the weather improves hopefully tomorrow I will check the batteries like John said and I will double check the set up mode
-
John, Elizabeth
I received my new power converter from Spartan , the camera is still getting no power I tried three different receptacles still nothing .
I am going to have to send it back Spartan and have the technicians look at it.
How do I go about returning the camera I forgot how ?
At least I still have 12 good Lithium batteries those things can get a little pricey.
Thanks for your help !!
Jeff
-
send an email to support@spartancamera.com and tell them what happened and that you need an RMA.
Please sign in to leave a comment.
Comments
10 comments