New SR4-BK (Spartan Eclipse) is taking way too many photos

Comments

6 comments

  • John Lockburner

    Put the camera face down in a closet or drawer and see if it still triggers. It may have an over active sensor and need to be replaced

    1
    Comment actions Permalink
  • Elizabeth Swoope

    Ditto what Johnny says about testing the sensor.

    Low is for cold temps. Gently blowing grass can and will trigger a camera.

    1
    Comment actions Permalink
  • Permanently deleted user

    Thanks for the feedback.  I did as John suggested and had the camera in a closet - no photos.  So I guess the culprit to 400+ photos a day is gently blowing grass?  Seems silly to have an outdoor camera that can't function properly in common outdoor conditions.  What do others do then, if the sensitivity setting doesn't control this aspect of motion and there are no other software settings to ignore gently blowing grass? 

    0
    Comment actions Permalink
  • John Lockburner

    Can you post a picture from the camera? You may have to set your phone to desktop mode to see the insert image icon. Most people trim the grass. Since the camera detects movement (change in temperature) blowing grass can trigger the camera but it usually needs to be a bunch of grass or a twig or weed.

    0
    Comment actions Permalink
  • Permanently deleted user

    I've had other cameras in this meadow and those cameras didn't take photos continuously because of motion - one of the cameras was a Spartan GoLive but I moved it because there's too limited cell coverage in this meadow.  Mowing is not an option for me, this is a wild meadow.  Here's a photo.

    0
    Comment actions Permalink
  • John Lockburner

    Can you clear out any of the brush that's closest to the camera? especially that stuff that's in the bottom right of the picture.

    0
    Comment actions Permalink

Please sign in to leave a comment.