Gocam GC-Z4Gb2

Follow

zane allison

• August 31, 2020 11:49

Camera will take send pictures from the middle of the night till around 30 minutes after daylight. Firmware up to date and card formatted to camera. When i pulled the card there were a lot more pictures taken than sent. Sent only about every 5th picture. Shows good signal(4bars) but batteries are not lasting long at all.  

0

• 

  Elizabeth Swoope

  • August 31, 2020 11:54

  Can you please post a screen shot of the status report from the app? We need to see everything from the top through the SD card info. This could be an SD card problem.

  0

  Comment actions Permalink
• 

  John Lockburner

  • August 31, 2020 11:57
  • Edited

  Make sure that your daily limit is set to zero. Are you using any start/stop times?

  -1

  Comment actions Permalink
• 

  zane allison

  • August 31, 2020 18:23

  

  0

  Comment actions Permalink
• 

  Elizabeth Swoope

  • August 31, 2020 18:24

  Your batteries are low.

  0

  Comment actions Permalink
• 

  zane allison

  • August 31, 2020 19:06

  That's what i said in the initial post, The batteries are not lasting long at all. I can put new batteries in the camera and it still wont send pictures through out the day. I just need it to send me all the pictures it is taking.

  0

  Comment actions Permalink
• 

  John Lockburner

  • August 31, 2020 19:10

  Do you have power save turned on in the camera settings on the app?

  0

  Comment actions Permalink
• 

  Elizabeth Swoope

  • August 31, 2020 19:11

  I'm sorry. I have probably worked with at least 15 people already today and it's hard to keep everything straight (and this is not my "day" job).
  
  If you are not getting all the pics that are taken, then there is a signal problem (which is possible, looking at the 4 bars) or an SD card problem (but you've recently formatted it or changed cards so maybe that has fixed the problem if it's an SD card).
  
  Do you have any scheduled event photos? Have you checked to be sure that you don't have start stop times set? Do you see a pattern in the photos that aren't sent (all daytime?). Could be signal fluctuation.

  0

  Comment actions Permalink
• 

  zane allison

  • August 31, 2020 19:39

  Power saving is turned off I will install a different SD and see if it works.

   

  Thanks

  0

  Comment actions Permalink
• 

  John Lockburner

  • August 31, 2020 19:49

  You want power saving turned on, if it's off you are gong to go through batteries much much faster.

  0

  Comment actions Permalink

Please sign in to leave a comment.