Camera has battery power and good reception but not taking pictures! Cameras are not one month old yet. I’m in Texas, and the cameras are in New Mexico. Help, I need pictures!
-
It sounds like you bought a 3 month/1 G plan from Spartan for each camera. Those data plans include premium credit. If you ran out of data, you would have gotten an email when you had 10% left so it’s probably not data.
What are the specs of the SD cards you are using?
You mention cattle. Are the cameras where the cattle can get to them? If so, something may have happened to the antennas. Not saying that’s likely but I don’t know any camera people who like having cows around.
-
The fact that the cameras took pictures the first few days doesn't necessarily mean that the SD cards are "to spec". Cameras sometimes work with marginal or even wrong SD cards for a while.
Here's an article on SD cards so you can confirm that your SD cards are "to spec".
-
I went to the website, found the correct SD cards. I have purchased three at Best Buy, and will take them to New Mexico with me. I hope that solves the problem. very disappointed that I have not had pictures in that period of time. I’m headed back to New Mexico with my grandson on an elk hunt, and those were our scouting cameras. Will let you know if that solves the problem.
-
OK, just got back from my L cunning trip with my grandson in New Mexico. I bought The required SD cards from Best Buy. I installed brand new lithium batteries, even though it was showing full power. As before they took pictures for about two days and then completely stopped taking pictures. So highly disappointed in Spartan. I have six Spypoints that are a lot less expensive, but I had to use external antennas for the reception. All three cameras showed full battery power and full bars on reception. We brought these cameras back to our camp, where we had good reception from Verizon, and they still would not work. I paid over $800 for three cameras. Send me your address so I can send these camelback for either a refund, or three new cameras.
Again, very disappointed!!! -
Look sat the status report for the cameras, is the firmware up to date? Also go into the menu and to diagnostics and see if the camera will pass the hello test. If you could post screen shots of the status reports from the cameras that would be helpful too. If using your phone you might have to hit the drop down menu at the top of the page and check off desktop to see the insert image icon.
Please sign in to leave a comment.
Comments
17 comments