Initial trigger delay

Follow

Colton Howard

• September 21, 2020 20:39
• Edited

My camera seems to take some time to start taking pictures or videos even when the animal is within a few feet of the camera. I keep getting pictures or videos of the animals ass end as it's leaving the frame. The video I have literally just shows it's ass within 2 feet of the camera. This is on the high setting

0

• 

  John Lockburner

  • September 21, 2020 20:45

  I would tilt the camera up a little bit, if the deer are coming right to left they may be above the sweet spot in the sensing area. That will also help get your flash to carry out farther and brighten things up even more rather than most of the flash hitting the ground right in front of the camera. If you think it's aimed too high after tilting it up then just lower the camera on the tree a bit.

  0

  Comment actions Permalink
• 

  Colton Howard

  • September 21, 2020 20:59

  I'm going to be adjusting angle and back drop as well. But I have one super close as well that didn't trigger well. 

  

  0

  Comment actions Permalink
• 

  John Lockburner

  • September 22, 2020 01:50

  When they are that close it doesn't take long to get from one side of the frame to the other. Are you using video only or photo + video?

  0

  Comment actions Permalink

Please sign in to leave a comment.